Projects
The work speaks for itself.
A few recent jobs — what the brief was, what we did, and how it finished. Every one certified, every one with aftercare.
Domestic · Private homeownerWhole-home renovation — kitchen, dining and games room
Full electrical fit-out for a high-spec open-plan renovation — feature pendant lighting, kitchen island power, media walls and a games room.
Read the case study →
Domestic · Private homeownerGarden room — power, lighting and outdoor living
A garden room and decked seating area brought to life after dark — interior power, warm exterior lighting and outdoor sockets, fed safely from the house.
Read the case study →
Domestic · Self-builderBarn conversion — wired through the oak frame
Full first and second fix through a barn conversion — routes threaded around exposed oak trusses and masonry, finishing with a clean, modern kitchen against original timber.
Read the case study →
Domestic · Private homeownerFeature lighting, stairs and bathrooms
The detail end of a renovation — LED reveal along exposed stone, lit stair treads, and bathroom electrics with recessed niche lighting.
Read the case study →
Commercial · Salon ownerSalon fit-out — power, feature lighting and signage
Complete electrical fit-out for a tanning and beauty salon — ring lighting, backlit signage, neon features and the power infrastructure behind the machines.
Read the case study →
Commercial · Business premisesWorkplace EV charging — installed and ready to bill
Twin charge points at business premises — wall-mounted units, hoop protection, marked bays and accessible parking provision.
Read the case study →
Commercial · Retail showroomFurniture showroom — LED overhaul and feature wall
Retail lighting for a large furniture showroom — high-level LED runs across the steel frame and a neon-lettered living-wall feature at the entrance.
Read the case study →
Industrial · Agricultural processorConveyor installation — built, wired and commissioned
A new conveyor line for an agricultural processing building — mechanical build supported, control panel wired from scratch, safety stops fitted and the line commissioned.
Read the case study →
Industrial · Processing siteOutdoor site controls — replaced in the worst of the weather
Corroded outdoor control gear on a processing site stripped out and replaced with new weatherproof Shrop-lec-built panels — in winter, around a live operation.
Read the case study →
Industrial · ManufacturerControl panel rebuild — obsolete relays to new PLC
A tired relay-logic panel rebuilt around a new Siemens PLC — obsolete parts out, loomed wiring in, drives and safety circuits brought up to standard.
Read the case study →
Renewables · Private homeownerSolar retrofit — panels, skylights and all the paperwork
A black-on-black array threaded between skylights on a low-pitch roof — surveyed, designed and installed in-house, with the isolation and export paperwork done.
Read the case study →
Renewables · Building ownerHeat pump installation — outdoor units to cylinder room
A twin-unit air source heat pump installation — outdoor units set on proper bases, a new unvented cylinder, and the controls wired and commissioned.
Read the case study →
Renewables · Private homeownersHome EV charging — installed and properly tested
A run of home charger installations across the county — different houses, different chargers, same standard: neat mounting, protected supplies, and every unit load-tested before handover.
Read the case study →Got a job like these? Tell us about it.
Complicated is fine. Send the brief and we'll give you a straight answer.